عجلة مشط التبن Walvoil DPX100 + Scanreco RC400 Maxi 2 Joystick لـ آلات قطع الأشجار

Walvoil DPX 100 12/24 V hydraulic valve with 6 proportional sections + 1 on/off section, open/closed centre position and additional levers. The valve features a post-compensation section.

Scanreco G2B Mini 6 pads 12/24 V. Also available with 6 or 8 pads.

This kit is configured for the most common machine set-ups and supports up to 7 standard functions of forestry cranes. If you require a different, bespoke configuration, we can tailor it to your requirements, including variations in solenoids, voltage, number of sections, anti-shock valves, connections, etc. The relief valve can also be adjusted as required. Solenoid type and flow rate can be selected individually to suit your application. Please send us a diagram so that we can assist you further.

The kit is designed for plug-and-play convenience. We take care of everything, from the connectors to the software configuration.

We offer technical support and are available at any time via email, WhatsApp and telephone.

If you have any questions or require assistance, please feel free to contact us at - or -.

Once the order has been placed, the flow rate and pressure can be fully customised to the customer’s specific requirements.

---------------------------------------------------------------------------------------------------- ------------------------------------------------------------

Walvoil DPX 100 hydraulic section valve with compensation, fully proportional

Technical data for the standard configuration:

Inlet section: 32 GPM 120 l/min – Pmax 300 bar 4351 psi Power supply connection: 3/4‘ BPS, tank return connection: 3/4’ BPS

1. Main boom 60 l/min 16 GPM anti-shock valves 190/80 bar 2755/1305 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

2. Boom 60 l/min 16 GPM anti-shock valves 190/220 bar 2755/3190 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever

3. Swivel range 40 l/min 10 GPM anti-shock valves 200/200 bar 2900/2900 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever

4. Extension 80 l/min 21 GPM anti-shock valve 140 bar/blocked bar 2030 psi side A 4/3 centre; A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

5. Rotator 20 l/min 5 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever

6. Grapple 60 l/min 16 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever

7. Outrigger 20 l/min 5GPM A+B closed circuit, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; spool: 20 l/min; no anti-shock valves

Outlet section: with the option of valve combinations, with a vent valve (LS relief), with a pressure-reducing valve. Control port ‘V’ and drain port ‘L’ sealed. Side ports ‘T1’, ‘P1’ and ‘LS1’ sealed. DBV fixed and sealed to 175 bar at 90 l/min.

Scanreco G2B Mini 2 joysticks


- 2 proportional joysticks

- Stop function in accordance with EN ISO 13849-1 Cat. 3, PL e

- Various toggle switches, push-button switches and rotary switches

- Frequency bands: 433–434 or 902–928 MHz (other frequencies available on request)

- Range > 100 m / > ~330 ft.

Protection class: IP65

Operating temperature: 20 °C to +70 °C / ~4 °F to +160 °F

- Wired control: standard length 10 metres / ~33 feet.

- G2B receiver PWM 12 or 24 VDC power supply

- Choice of wireless or wired control

- 8 bidirectional proportional outputs

- All analogue outputs are programmable for final speed adjustment

- 14 digital outputs (of which 1 is a combined input/output) and 4 digital inputs (of which 1 is a combined input/output)

- One DV output for controlling the drain valve

- Radio communication in the ISM band using frequency-hopping technology

- Manual mode available to bypass the radio system by providing only the DV output, thereby enabling manual control via the hydraulic manifold (where available).

- Programmable logic with block, hold, delay and ramp functions, and much more

– Please note that cable harnesses and connector sets are NOT included and must be ordered separately if required.

Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (excluding colour display)